Specifications

Center V2

4.4 Configuring a Virtual I/O Box

Now the Center V2 operator can also activate alarm outputs installed through the network

(hence, a virtual I/O device) to inform the Center V2 operator when events occur. A maximum

of 9 I/O boxes (including local and remote I/O boxes) can be connected to one Center V2

server.

Note:

1. Only 8-port and 16-port GV-I/O Boxes can be connected to Center V2 through

Ethernet.

2. The GV-I/O Box must be installed in the same LAN with the Center V2 server.

To set up a virtual GV-I/O Box on Center V2 server:

1. On the Center V2 window, click the Preference Settings button

and select Virtual

I/O. The Virtual I/O Device dialog box appears.

2. Click the Add button. This dialog box appears.

Figure 4-13

3. Select the device using the drop-down list, and type the IP address, ID and Password

of the GV-I/O Box.