Installation Manual

Arecont Vision MegaVideo
®
Compact Camera Series Installation Manual
2
|
Pa
g
e
NOTE 1: Ensure that the polarity of the DC
input on the camera matches the way that
wires are installed in the connector shown in
Image 3-2.
NOTE 2: AC power does not have polarity.
Image 3-1
Image 3-2
Camera Installation:
6. Install the AV100 application manager
software as shown in Image 4. (found on the
CD)
7. Run the AV100 application manager by
double clicking on the icon as shown in Image
5. (found on your desktop)
Image 4 Image 5
8. Select “Run” next to “Setup Cameras” from
the AV100 application manager as shown in
Image 6 and wait for “Arecont Vision Camera
Installer” window to appear as shown in
Image 7.

Image 6
9. Click “Mode” tab to select desired install mode
on the Arecont Vision Camera Installer as
shown in Image 7.
NOTE 1: Basic Mode (default setting): software
will automatically discover and change / assign
IP address to match PC subnet.
NOTE 2: Advanced Mode: software will
automatically discover but allow manual update
of the IP address. See “AV100 Installation
Manual” (found on the CD) for details on
Advanced Mode.