Installation Manual

Arecont Vision MicroDome™ Installation Manual
Page | 14 [e-mail]
Pendant Mount Accessory (MCD-CMT)
Alignment features must be aligned
for proper installation.
Installation Notes:
1. 3x mounting screws are #10x1”
wood or sheet metal screws (3x
mount anchors also included).
2. Always ensure gaskets are properly
seated.
3. Use Teflon tape on threaded
interfaces.
4. 3/8” male to 1/2” female NPT
adapter included.
5. Mount holes from camera housing
to flange are not symmetrical.
Alignment features indicated must
be properly lined up for mount
hole alignment.
Gasket