Installation Manual

Arecont Vision MicroDome™ Installation Manual
Page | 13 [e-mail]
Wall Mount Accessory (MCD-WMT)
Installation Notes:
1. 4x mounting screws are #10x1” wood or sheet metal screws (4x mount anchors
also included).
2. Always ensure gaskets are properly seated.
3. Use Teflon tape on threaded interfaces.
4. 3/8” male to 1/2” female NPT adapter included.
5. Mount holes from camera housing to flange are not symmetrical. Alignment
features indicated must be properly lined up for mount hole alignment.
Alignment features must be aligned
for proper installation.
Gasket