Installation Manual

Installation Manual
Page | 26 [e-mail]
!
!
!
+1.818.937.0700 877.CAMERA.8 www.arecontvision.com [e-mail]
MegaDome
®
G3
Auxiliary I/O Functions
The auxiliary input and output are accessible after removing dome cover.
Reference #
Description
1
Input (White + / Black -)
2
Output (Orange + / Yellow -)
NOTE: MegaDome
®
G3 camera supports digital input and digital output. See Table 1 for electrical
characteristics.
Electrical Characteristics
MIN
MAX
Input Voltage (V)
(Measured between +
and – terminals)
ON
3.5
6.3
OFF
0
1.3
Output Current (mA)
(Measured between +
and – terminals)
Applied Voltage
Range: 0-80V
ON
-
50
OFF
-
0.1
Table 1
NOTE: The digital input is electrically isolated from the rest of the camera’s electrical circuitry via
general-purpose photo couplers. The input is additionally protected with a serial 250 Ohm resistor, and
a de-bouncing circuit. Duration of any input signal should be at least 5 ms to comply with the
requirements of the de-bouncing circuit.
NOTE: Table 2 shows the cable color for digital input and output.