User manual

ARECONT VISION USER MANUAL 87
Arecont Vision 425 E Colorado St, 7
th
Floor Glendale, CA 91205 8/1/2012
www.arecontvision.com
not send images until motion is detected. The user can adjust 3 motion detection sensitivity settings
and specify up to 64 motion detection zones.
21. Can image archival be configured for cyclic recording?
AV100 software will overwrite old files every few minutes once the available disk space reaches a
limit value that the end user can set. This value is set under the “Archive” menu in “Minimum Free
Disk Space” in the AV100 software.
22. How can I access the SDK download?
Access to the SDK requires an NDA (Non-Disclosure Agreement) to be signed and approved prior to
obtaining access. More information can be provided through [e-mail] or by
accessing the support section of http://www.arecontvision.com/
23. How do the Arecont Vision cameras utilize PTZ (Pan, Tilt, Zoom)?
There is no mechanical PTZ. However, Arecont Vision cameras allow instantaneous electronic pan,
tilt and zoom by specifying PTZ window coordinates. Multiple users can each select their own
windows allowing for independent PTZ control.
24. How can I get the AV100 built-in web server to work?
AV100 software has a built-in web server that allows multi-user remote access to live video and video
archives. This web server can be accessed from any web browser by typing:
HTTP://ip_address:port/guix.htm
Where ip_address is the IP address of the computer running AV100 and the port corresponds to the
port number set in the Remote Viewing menu. Please note that in order to access the AV100 server
remotely, the user should enable the server by checking the “Allow Remote Viewing” field and
selecting a port that is not blocked by their firewall. For increased security the default value of remote
access port is 4250, but any port may be selected for this purpose. Often, port 80 (HTTP port) is
most likely to be open on a secured network as it is used by default for most web browsing. See page
37 for more details on configuring remote viewing.
25. What is the night performance (Lux) of the AV3130 camera?
In low-light conditions AV3130 switches to 1.3 megapixel monochrome sensor resulting in good
image quality down to 0.01 Lux. AV3130 is also sensitive to near-infrared illumination, allowing the
use of standard infrared illuminators as a light source.