User manual

ARECONT VISION USER MANUAL 43

Arecont Vision 425 E Colorado St, 7

Floor Glendale, CA 91205 8/1/2012

www.arecontvision.com

 Dump logs camera settings to a file named LocalMachine.ini located in the installation directory.

When contacting Arecont Vision’s technical support, this file should be included.

 Video displays live video in full-screen mode.

 Import License

will import a specified license file so that the software’s archive functionality is

accessible.

 Save to Flash saves camera setting to camera flash memory.

 Factory Default resets the camera setting without changing camera IP Address to factory settings.

Photo enables saving and printing individual snapshots, as well as browsing:

 Save takes a snapshot of live video and saves it in the snapshot folder. The snapshot is taken

from the camera which is highlighted in the drop-down list of the installed cameras on the left

side (see Toolbar on pg.21). To highlight another camera, left-click on the camera number. To

take the snapshot from all cameras, highlight “cameras” at the top of the drop-down camera list.

 Save/Print takes a snapshot and prints it instantly.

 Browse opens the snapshot folder for browsing.

Browse presents three options:

 Archive enables access to browsing archives (See Browsing Archives).

 Photos enables access to snapshots taken with the Arecont Vision cameras. The default

snapshots location is C:\Documents and Settings\(User Profile)\My Documents\My

Pictures\Arecont Vision Photos, a different directory path to the snapshot folder can be specified

in the Settings menu (see Settings on pg.22).

 HTTP

opens the default web browser to view the video stream from the selected camera via the

web browser.

Hide minimizes the AV100 Video System application and hides it in the system tray of the Windows task bar.

Log off logs off the current user.

Exit exits the AV100 Video System application.

About shows the version of the AV100 Video System software and additional information for each of the

installed camera(s): version of firmware and hardware, MAC address, and IP address.