User manual

ARECONT VISION USER MANUAL 39
Arecont Vision 425 E Colorado St, 7
th
Floor Glendale, CA 91205 8/1/2012
www.arecontvision.com
Remote Viewing
AV100 has a built-in web server allowing Arecont Vision cameras and archives to be viewed remotely (Figure
22).
Figure 22. Remote viewing menu
Right-clicking anywhere on the Explorer web page will provide access to the options menu:
Click Save to take a snapshot image.
 Click Manage Servers to provide server information and allows changes to the servers.
 Click Auto Hide Menu to automatically hide the main menu.
 Click Settings to adjust camera and video settings.
To enable the built–in HTTP server, select Remote viewing from the Setting
menu and do the following:
1. Select Allow Remote Viewing.
2. On the bottom of the menu click Apply then Ok.
3. Start Internet Explorer and type in the address of the web server. For
example, if AV Video System is installed on a PC with IP address
200.168.1.102, type in the following address:
http://200.168.1.102:4250/guix.htm
4. Then click Enter to have Internet Explorer open that page.
Upon successful connection a web page will open. Internet Explorer will
prompt to install an ActiveX component. Click on the webpage as
prompted to install ActiveX.
The main AV menu located on the left hand side of the IE window will provide
full access to each Arecont Vision camera. Selecting the Arecont Vision
camera of choice will display the option to disconnect as well as make changes
to settings such as the Resolution Speed, Archive, Zoom and viewing images in
separate windows.
Access from outside the local network will require that the server PC is
accessible on the selected port. Please ensure that any routers or firewalls
have this port open for outside user access.