User manual

ARECONT VISION USER MANUAL 27
Arecont Vision 425 E Colorado St, 7
th
Floor Glendale, CA 91205 8/1/2012
www.arecontvision.com
ROI can be configured by right-clicking on the green outline of a selected region of interest and selecting “ROI”
from the menu. A separate ROI sub menu will open.
 Lock this ROI will freeze the ROI position in place and disable PTZ functions.
 Delete this ROI deletes the selected ROI and is the same as closing an ROI window.
 As New Camera creates a new video window of the selected ROI as a virtual camera, and assigns
new numbers to the cameras starting at ROI-101. The virtual camera video can be archived
independently as any other camera, and its archival frame rate and video display frame rate can be
independently adjusted.
 Archive/ View Settings opens up archival settings menu to set the rate of ROI archiving and viewing.
 As Exposure Reference enables the on-camera auto-exposure system to use the brightness within
the ROI to adjust the overall brightness of the entire camera image while ignoring the brightness
NOTE: The actual number of frames per
second / minute depends on camera
model, image resolution, exposure settings,
etc.
NOTE: If both boxes are checked, the
displayed frame rate (the frame rate display
is enabled by pressing Ctrl-S) corresponds
to the view rate value.