INST TALL LATIO ON MA ANUAL L AV1455DN-S AV2455DN-S AV2456DN-S AV3455DN-S AV3456DN-S AV5455DN-S
Arecont Vision MicroDome™ Installation Manual MicroDome™ Surface Mount Installation Contents Package Contents ....................................................................................................................................................... 3 Warranty Information ................................................................................................................................................ 3 Installation Overview ........................................................
Arecont Vision MicroDome™ Installation Manual Package Contents Item MegaPixel Camera Mounting Kit Arecont Vision CD Description MicroDome™ Ceiling template 6x Mounting Screws 3/8” NPT Male to 1/2” NPT Female Adapter Network Patch Cable 3x Security Torx Dome Cover Fasteners Manual, Warranty, Installation Software Warranty Information 3 Year Limited Warranty ARECONT VISION warrants to Purchaser (and only Purchaser) (the “Limited Warranty”), that: (a) each Product shall be free from material defects in mat
Arecont Vision MicroDome™ Installation Manual Installation Overview Ceiling Gasket NPT Port Camera Housing Mounting Screws Captive Fasteners (Hand Tighten Only) Page | 4 support@arecontvision.
Arecontt Vision MicroDome™ ™ Installation Manual Installation Tech Tip 1. Visit http://ww ww.arecontvision.com/ and check to ennsure your caamera has thee most curren nt firmware. 2. Fo or installation ns in harsh en nvironments it i is recommeended to use all six mountting screws su upplied with yo our camera to o create the best b seal posssible betweenn your camerra and the mo ounting surfacce using the su upplied gaske et. 3.
Arecont Vision MicroDome™ Installation Manual Page | 6 support@arecontvision.
Arecontt Vision MicroDome™ ™ Installation Manual Focusing the Camera C Tech Tip Tech Tip Page | 7 1. Open O a live vie ew of the cam mera from you ur web browsser or the AV Software pro ovided (AV100 0 or AV200). 2. Lo oosen the len ns lock screw using a phillip ps head screw wdriver (if necessary). Only do so if len ns seems very y tight when turrning. Lock sccrew should be tightened enough e to pro ovide some frriction againstt the lens to avoid a fo ocusing problems. 3.
Arecontt Vision MicroDome™ ™ Installation Manual Changging the Lens 1. Remove the Dome Cover byy loosening th he captive fassteners. 2. Lo oosen the len ns lock screw using a phillip ps head screw wdriver (if necessary). Only do so if len ns seems very y tight when turrning. 3. Manually M unsccrew the lens,, this may takke se everal second ds. 4. Replace lens. 5. Retighten the lock screw if necessary. 6. Reinstall Dome e Cover per in nstructions outlined above e.
Arecont Vision MicroDome™ Installation Manual Digital Input and Output Use 4 position connector inside camera housing to interface with Digital I/O. DIGITAL I/O BLACK IN ‐ WHITE IN + YELLOW OUT ‐ ORANGE OUT + Electrical Characteristics Input Voltage (V) (Measured between + and – terminals) Output Current (mA) (Measured between + and – terminals) Applied Voltage Range : 0‐80V MIN MAX ON 2.9 6.3 OFF 0 1.3 ON ‐ 50 OFF ‐ 0.
Arecont Vision MicroDome™ Installation Manual LED Indicators LED Yellow Status Flashing Green Solid None Flashing Solid None Page | 10 support@arecontvision.com Description Link has been established. Normal Operation. No connection. Camera has been accessed. Normal operation. N/A No Connection.
Arecont Vision MicroDome™ Installation Manual Support 1. Arecont Vision FAQ Page Located at ArecontVision.com 2. Check the following before you call: Restore camera to factory default with AV100, AV200 or the camera webpage. Upgrade to the latest firmware by visiting ArecontVision.com. Isolate the camera on a dedicated network and test with AV100 or AV200. Swap the “troubled” camera with a known good camera to see if the problem follows the camera or stays at the location. 3.
Arecont Vision MicroDome™ Installation Manual Camera Discovery, Setup, and Configuration For camera discovery and setup please use Arecont Vision software AV200 which you can find on the CD included with your camera or at: http://www.arecontvision.com/softwares.php The user manual for the AV200 software is included on the CD and is also located on our website. To configure the camera use either the AV200 software or the web interface utility.
Arecontt Vision MicroDome™ ™ Installation Manual Wall Mount M Accessor A ry (MCD‐‐WMT) Gaskeet Allignment features must be aliggned for prroper instaallation. Installaation Nottes: 1. 2. 3. 4. Page | 13 Always A en nsure gaskkets are properly p sseated. Use U Teflon n tape on n threaded interfacces. 3/8” 3 male e to 1/2” female f NPT adapteer includeed. Mount M ho oles from camera housing h to o flange aare not syymmetriccal.
Arecontt Vision MicroDome™ ™ Installation Manual Pendaant Mou unt Accessory (M MCD‐CM MT) Installation No otes: 1. Always eensure gaaskets aree properlyy seated. 2. Use Teflon tape o on thread ded interfacees. 3. 3/8” maale to 1/2”” female NPT d. adapter included 4. Mount h holes from m cameraa housing to flangee are not symmettrical. Aliggnment featuress indicated must be properlyy lined up p for mount hole aliggnment. Gaasket Alignmentt features must be aligned for proper insstallation.
Arecont Vision MicroDome™ Installation Manual Mount Template: MicroDome Camera Page | 15 support@arecontvision.
Arecont Vision MicroDome™ Installation Manual Mount Template: MicroDome Wall Mount Page | 16 support@arecontvision.
Arecont Vision MicroDome™ Installation Manual Mount Template: MicroDome Pendant Mount Page | 17 support@arecontvision.
Arecont Vision MicroDome™ Installation Manual Contact Arecont Vision Technical Support one of three ways: Online Portal : Support.ArecontVision.com Phone : 1.818.937.0700 (option #1) Email : support@arecontvision.com Page | 18 support@arecontvision.
