Installation Manual

! ! Installation Manual
!
Page | 6 support@arecontvision.com
!
!
!
+1.818.937.0700 877.CAMERA.8 www.arecontvision.com avsales@arecontvision.com
MegaDome
®
G3 RS
Camera Overview!
MegaDome
®
G3 RS third generation multi-megapixel cameras provide ample resolution to zoom-in for
details in live or recorded video. With an IR corrected motorized lens and gimbal, MegaDome G3 RS is
easy to install and manage with “no-touch remote setup.!Install the magnetic mounting plate, connect
the PoE (Power-over-Ethernet) IP cable, magnetically snap in place and fasten the camera to the
mounting plate, and then remotely configure the camera. Use the intuitive interface to remotely pan, tilt,
zoom, and focus the sensor.
These indoor/outdoor all-in-one solutions integrate a 1080p, 3, or 5-megapixel (MP) sensor with fast
frame rates, and SNAPstream™ (Smart Noise Adaptation and Processing) technology to reduce
bandwidth without impacting image quality. The True Day/Night mechanical IR cut filter provides the
highest image quality at any time of day. Select 3MP models of MegaDome G3 RS include wide
dynamic range (WDR), delivering up to 100dB at full resolution for applications with bright or over
saturated lighting conditions. All models feature CorridorView for 90° image rotation, non-integer
scaling, and an SDHC memory card slot for internal storage. The installer-friendly housing is IP66 rated
for both indoor and outdoor applications and the cast-aluminum housing is IK-10 impact resistant,
capable of withstanding the equivalent of 55 kg (120 lbs) of force.
The camera is integrated with the industry’s leading VMS/NVR platforms. Using the camera interface or
the AV IP Utility, security updates and both new or enhanced features can be applied to the cyber-
hardened MegaDome G3 RS’s Massively Parallel Image Processing (MPIP) architecture. This in house
developed architecture runs on the Field Programmable Gate Array (FPGA) integrated circuit that is at
the core of every Arecont Vision camera. The MegaDome G3 RS is ONVIF (Open Network Video
Interface Forum) Series S compliant, providing interoperability between network video products
regardless of manufacturer.