Installation manual

Arecont Vision MegaView
®
2 Installation Manual
Page | 9 [e-mail]

Optional: Enable Audio:
17. Connect a mono analog microphone to
Microphone In and connect an active
speaker with a built-in amplifier via the in-
line jack as shown in Image 8, if needed.
18. Choose “H.264 over RTP/UDP” as shown
on Image 10-1 and check “Enable
Microphone” then click “Preview” and
“Apply” buttons as shown on Image 10-2.
NOTE: Audio only works in H.264 RTP/UDP
streaming
.
 Image 10-1 Image 10-2
