Installation Manual

Installation Manual
Page | 25 [e-mail]
+1.818.937.0700 877.CAMERA.8 www.arecontvision.com [e-mail]
SurroundVideo® Omni SX
Aligning the Cameras
Properly aligning each camera is essential during setup. Each camera must be placed in a
counterclockwise sequence on the circumference of the track to ensure proper viewing of each camera.
Figure 1: Place cameras in counterclockwise position on the track
Reference #
Description
1
Sensor 1
2
Sensor 2
3
Sensor 3
4
Sensor 4
When positioning the sensors, ensure the conduit mounting hole does not obstruct the cable when
positioning the sensor.