Installation Manual

58
ConteraIP
®
Omni LX RS Installation Manual
Host Address
Port
Username
Password
Host Address: Specifies the host
name or IP address of the FTP server.
Port: Specifies the port number of the
FTP server.
Username: Specifies the login
username of the FTP server.
Password: Specifies the login
password of the FTP server.
Event > SMTP Notification
SMTP Notification
Handler
From: Specifies the email address of
the sender
Selects a desired trigger source. The
options are Trigger Alarm Detection,
Trigger Motion Detection, and Trigger
Tampering Alarm.
SMTP Server
Host Address
Port
Username
Password
Authentication
Host Address: Specifies the host
name or IP address of the SMTP
server.
Port: Specifies the port number of the
SMTP server.
Username: Specifies the login
username of the SMTP server.
Password: Specifies the login
password of the SMTP server.
Authentication: Specifies the
authentication mode of the SMTP
sever. The options are NO_AUTH,
SMTP_PLAIN, LOGIN and TLS_TLS.
Recipient List
Specifies the email addresses to send
the email notification when selected
events are triggered by Alarm, Motion,
or Tamper. A maximum of 10 email
addresses can be configured.
Network Storage
Handler
Enables and selects a desired trigger
source. The options are Trigger Alarm
Detection*, Trigger Motion Detection,
Trigger Tampering Alarm, and Trigger
Scheduled.
*This function is supported depends on
models.
Recipient Setup
Network Storage Status: Displays the
current status of the connection with