Installation Manual

!! ! Installation!Manual!
Page | 24 [e-mail]
!
!
!
+1.818.937.0700 877.CAMERA.8 www.arecontvision.com [e-mail]
MicroDome®!G2
Pendant Mount Accessory (MCD-CMT)
!
&
&
&
&
&
&
&
&
&
&
&
!
!
!
!
!
! !
Alignment!features!must!be!aligned!
for!proper!installation.!
Installation Notes:
1. 3x mounting screws are #10x1” wood or
sheet metal screws (3x mount anchors
also included).
2. Always ensure gaskets are properly
seated.
3. Use Teflon tape on threaded interfaces.
4. 3/8” male to 1/2” female NPT adapter
included.
5. Mount holes from camera housing to
flange are not symmetrical. Alignment
features indicated must be properly lined
up for mount hole alignment.
Gasket!