Installation Manual
!! ! Installation!Manual!
Page | 23 support@arecontvision.com
!
!
!
+1.818.937.0700 877.CAMERA.8 www.arecontvision.com avsales@arecontvision.com
MicroDome®!G2
Wall Mount Accessory (MCD-WMT)!
!
&
&
&
&
&
&
&
&
&
&
&
!
Installation Notes:
1. 4x mounting screws are #10x1” wood or sheet metal screws (4x mount anchors also included).
2. Always ensure gaskets are properly seated.
3. Use Teflon tape on threaded interfaces.
4. 3/8” male to 1/2” female NPT adapter included.
5. Mount holes from camera housing to flange are not symmetrical. Alignment features indicated
must be properly lined up for mount hole alignment.
Alignment!features!must!be!aligned!
for!proper!installation.!
Gasket!