Installation Manual

!! ! Installation!Manual!
Page | 12 [e-mail]
!
!
!
+1.818.937.0700 877.CAMERA.8 www.arecontvision.com [e-mail]
MicroDome®!G2
Changing the Lens
1. Remove the dome cover by loosening the captive fasteners with the supplied Philips head
screwdriver.
Reference #
Description
1
Captive Fasteners
2. Loosen the lens lock screws (3) using the supplied flat-head screwdriver (if necessary). Only do
so if the lens seems very tight when turning.
3. Manually unscrew the lens counter clockwise, this may take several seconds.
4. Screw the replacement lens clockwise until you feel some resistance and hit a hard stop.
5. Retighten the lens lock screws (3) if necessary per instructions outlined above. Do not over
torque the screws.