Installation manual

Arecont Vision SurroundVideo
®
WDR Camera Installation Manual
17 | P a g e
AV12186DN / AV12366DN / MegaDome
®
Corner Mount Adapter (MD-CRMA) Installation Instructions
Inside the box:
A. Corner Mount Adapter
B. 2x Compression Fittings
C. Pack of four (4) machine screws #8-32
5/8”
D. 2x Packs of four (4) wood screws and four
(4) dry wall anchors
Not included but needed:
 #2 Phillips head screw driver
 MegaDome
®
Wall Mount Adapter
Image 37
1. Remove Corner Mount Adapter, Compress
Fitting and hardware from the box.
2. Install Compress Fittings to Corner Mount
Adapter as shown in Image 38.
3. Attach Wall Mount Adapter to Corner Mount
Adapter as shown in Image 36.
Image 38
Image 39
4. Run Ethernet Cable and outside power cable
(if necessary) through the Compress Fittings
and MegaDome
®
Wall Mount.
5. Using screws (or other hardware), attach the
Corner Mount Adapter to an exterior 90°
corner wall.
6. Attach Dome to Wall Mount Adapter. Please
reference “Mounting the Camera”, if needed.
7. Tighten the Compress Fittings to seal the wiring
holes.
A
B
C
D
Wall
Mount
Adapter
p