Installation Manual

Installation Manual
Page | 17 [e-mail]
+1.818.937.0700 877.CAMERA.8 www.arecontvision.com [e-mail]
MegaVideo® Flex
SD Card Set-up via Web Interface
To set-up the SD card via the web interface, open your preferred web browser and type the camera’s
IP address.
NOTE: For supporting H.264 streaming on a webpage, the recommended browsers are Internet
Explorer and Firefox.
Scroll to the SD Card section as shown here:
Select one of the recording methods:
 Continuous Recording to start continuously recording.
 Stop Continuous Recording AND Enable Event-triggered Recording to enable events
recording for network failure, motion alarm and/or I/O alarm trigger.
The Start and End times are visible once the camera starts recording (see image below). The start
time represents the beginning time of the oldest recording.