Installation Manual

Arecont Vision MegaView

v1 Installation Manual

7 | Page

MegaView™v1 Pole Mount Adapter (MD-PMA) Installation Instructions

A. Pole Mount Adapter

Inside the box:

B. 2x Compression Fittings

C. 2x Small Steel Straps

D. 2x Large Steel Straps

E. Pack of four (4) machine screws

• #2 Phillips head screw driver

Not included but needed:

Image 19

NOTE: MD-PMA also works with MD-WMT2, SV-

WMT and D4S-WMT

1. Remove Pole Mount Adapter, steel Straps

and hardware from the box.

2. Attach MegaView™ v1 bracket to Pole Mount

Adapter as shown in Image 20.

3. Use the supplied two Steel Straps to attach the

Pole Mount Adapter to the pole and tighten

the compression screws as shown in Image

21.

4. To adjust MegaView™v1 bracket, please

reference “Mounting the Camera”, if needed.

Image 20

Image 21

Compression

Screws