Installation Manual

Arecont Vision MegaView
TM
v1 Installation Manual
6 | Page
MegaView™v1 Junction Box Adapter (SV-JBA) Installation Instruction
A. Junction Box Adapter
Inside the box:
B. Pack of four (4) machine screws
C. One double sided hex key
D. Pack of four (4) wood screws and four (4)
dry wall anchors
E. Mounting Template
• #2 Phillips head screw driver
Not included but needed:
• ¾” NPT Conduit (if necessary)
NOTE: SV-JBA is same unit used for MegaDome
®
2 wall mount and SurroundVideo
®
wall mount
Image 14
1. Remove Junction Box and hardware from
the box
2. Remove the conduit plug by first removing
the socket set screw using one of provided
hex keys shown in Image 15
3. Attach Junction Box Adapter to the wall
using drywall screws or any optional
hardware suitable for the mounting
surface.
Image 15
Image 16
4. Connect ¾” NPT Conduit to Junction Box
Adapter shown in Image 16.
5. Run Ethernet Cable and outside power cable
(if necessary) through the Junction Box
Adapter and connect to Megaview™ v1 pigtail
cable.
6. Attach Megaview™ v1 to Junction Box
Adapter as shown in Image 16.
B
C
A
D
E