Installation Manual

Arecont Vision MegaView
TM
v1 Installation Manual
2 | Page
Image 3
CAUTION: Only adjust the screws with an
arrow pointing to them on the bracket base
and camera body (Image 4)
Image 4
NOTE : Bracket screws are all security
screws that are tamper-resistant.
NOTE : Bracket with 3 axes enables easy
installation in any location, including 360°
camera body rotation, 90° tilt, 360° bracket
rotation. (image 5)
Image 5
4. Align the holes in the camera with the
prepared holes on the mounting surface.
Attach the camera to the mounting surface
with the wood screws or any other hardware
that fits the mounting application. (image 6)
NOTE: Use junction box adapter, SV-JBA, to
ensure a water tight installation as shown in
Page 5. Use of silicon does not guarantee a
water resistant install.
Image 6
5. Plug Ethernet cable into the MegaView
TM
v1
PoE Female RJ45 connector. (Image 7)
NOTE: MegaView
TM
v1 is a total PoE class 3
solution to power the camera, IR illuminator
and fan.
Image 7
Digital In
Digital Out
Auxiliary Power
PoE RJ45
90
°
360
°
360
°
Adjustable Screws
Arrow