Installation Manual

Arecont Vision MegaView
TM
v1 Installation Manual
1 | Page
MegaView
TM
v1 Installation Manual
A. Arecont Vision MegaView
Inside the box:
TM
B. Pack of four (4) wood screws and four (4)
dry wall anchors
v1
C. Security L-key
D. Mounting Template
Image 1
• #1 Phillips head screw driver
Not included but needed:
• #2 Phillips head screw driver
Mounting the Camera:
1. Remove camera and hardware from the box.
NOTE : MegaView
TM
v1 is available in two
versions, DN and IR, shown in image 2. Both
versions have motorized day night switcher
but only IR version supports an IR LED ring.
Image 2
2. Use the Mounting Template to prepare the
mounting provisions for camera installation.
3. Use the security L-key to adjust
MegaView
TM
v1 bracket to appropriate
position. ( Image 3)
D
A
C
B
IR version
DN version