Installation Manual

Arecont Vision MegaView
TM
v1 Installation Manual
9 | Page
MegaView™v1 Corner Mount Adapter (MD-CRMA) Installation Instructions
A. Corner Mount Adapter
Inside the box:
B. 2x Compression Fittings
C. Pack of four (4) machine screws
D. 2x Packs of four (4) wood screws and four
(4) dry wall anchors
• #2 Phillips head screw driver
Not included but needed:
Image 22
NOTE: MD-CRMA also works with MD-WMT2, SV-
WMT and D4S-WMT
1. Remove Corner Mount Adapter and hardware
from the box.
2. Attach MegaView™ bracket to Corner Mount
Adapter as shown in Image 23.
3. Using the screws provided (or other hardware)
to attach the Corner Mount Adapter to an
exterior 90° corner wall as shown in Image 22.
4. To adjust MegaView™ bracket, please
reference “Mounting the Camera”, if needed.
Image 23
Image 24
A
B
C
D
Wall
Mount
Adapter