Installation Manual

8
Contera Bullet | Installation Manual
6. Install the supplied rubber plug on the bracket to ensure a water tight installation for outdoor
applications.
7. Connect the network cable to the camera’s RJ45 connector.
8. Align four supplied screws with the dry wall anchors, and screw Contera Bullet camera into place.
9. To configure the camera, reference the camera discovery, set-up and configuration section.
10. Use the supplied security L-key to adjust the bracket to appropriate position. The bracket with 3
axes enables easy installation in any location, including 360° camera body rotation, 90° tilt, 360°
bracket rotation.
11. To adjust the zoom and focus, see the “Zoom and FocusSection of this manual.