Installation Manual

7
Contera Bullet | Installation Manual
Installation
NOTE: The camera is suggested to be installed above 3 meters and covered by a minimum
3.1” (8cm) overhang eave.
1. Determine a secure location to mount the camera.
2. Use the template, anchors, and screws provided to prepare the mounting provisions for the camer
a
installation.
3. (Optional/ Recommended) Install AV-JBA-W junction box adapter (sold separately) to the wall using
appropriate hardware.
4. I
nstall four supplied dry wall anchors using the supplied mounting template.
5. (If necessary) To install SD card on the camera, see the “SD Card Installation” section of this manual.
No.
Description
1 Supplied Dry Wall Anchors
2
Supplied Screws
(4pcs #8-16 1¼” tapping screws)
3 Supplied Mounting Template
4 Contera Bullet Camera