Installation Manual

37
Contera Bullet | Installation Manual
Sensitivity Configures the sensitivity level of Tampering Detection:
High, Medium, and Low.
Remote Server
Host Address
Port
Username
Password
Host Address: Specifies the host name or IP address
of the FTP server.
Port: Specifies the port number of the FTP server.
Username: Specifies the login username of the FTP
server.
Password: Specifies the login password of the FTP
server.
FTP Upload Handler
Enable Trigger Event
Enables and selects a desired trigger source. The
options are Trigger Alarm Detection*, Trigger Motion
Detection, Trigger Tampering Alarm, and Trigger
Scheduled.
*This function is supported depends on models.
SMTP Notification Handler From: Specifies the email address of the sender
Selects a desired trigger source. The options are
Trigger Alarm Detection, Trigger Motion Detection, and
Trigger Tampering Alarm.
SMTP Server
Host Address
Port
Username
Password
Authentication
Host Address: Specifies the host name or IP address
of the SMTP server.
Port: Specifies the port number of the SMTP server.
Username: Specifies the login username of the SMTP
server.
Password: Specifies the login password of the SMTP
server.
Authentication: Specifies the authentication mode of
the SMTP sever. The options are NO_AUTH,
SMTP_PLAIN, LOGIN and TLS_TLS.
Recipient List Specifies the email address to send the email when
selected events are triggered by Alarm, Motion, or
Tamper. A maximum of 10 email addresses can be
configured.