User manual

BIOS CONFIGURATION
93
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Conguration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Ethernet Conguration
Time Device Event Type ElapseTime Errors
2004-1-1 12:00:00 H/W Monitor Raid Powered On
2004-1-1 12:00:00 H/W Monitor Raid Powered On
2004-1-1 12:00:00 H/W Monitor Raid Powered On
3.7.9 Clear Events Buffer
Use this feature to clear the entire events buffer.
3.7.10 Hardware Monitor
To view the RAID controller’s hardware monitor information, move
the cursor bar to the main menu and click the “Hardware Monitor”
link. The hardware information screen appears.
The “The Hardware Monitor” provides the temperature and fan
speed (I/O Processor fan) of the SATA RAID controller.
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Conguration
View System Events
Clear Event Buffer
Hardware Monitor
System Information
Hardware Monitor
The Hardware Monitor
Fan Speed (RPM) : 2178
Battery Status : Not Installed
HDD #1 Temp. : --
HDD #2 Temp. : --
HDD #3 Temp. : 48
HDD #4 Temp. : --
HDD #5 Temp. : --
HDD #6 Temp. : 49
HDD #7 Temp. : --
HDD #8 Temp. : --