User manual

BIOS CONFIGURATION
80
3.7.5.6 Maximum SATA Mode
The SATA RAID controller can support up to SATA ll, which runs
up to 300MB/s, twice as fast as SATA150. NCQ is a command
protocol in Serial ATA that can only be implemented on na-
tive Serial ATA hard drives. It allows multiple commands to be
outstanding within a drive at the same time. Drives that support
NCQ have an internal queue where outstanding commands can
be dynamically rescheduled or re-ordered, along with the neces-
sary tracking mechanisms for outstanding and completed por-
tions of the workload. The SATA RAID controller allows the user
to choose the SATA Mode: SATA150, SATA150+NCQ, SATA300,
SATA300+NCQ.
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Conguration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Raid System Function
Raid System Function
Mute The Alert Beeper
Alert Beeper Setting
Change Password
JBOD/RAID Function
Background Task Priority
Maximum SATA Mode
HDD Read Ahead Cache
Volume Data Read Ahead
Empty HDD slot LED
HDD SMART Status Polling
Controller Fan Detection
LED Polarity Setting
Auto Activate Raid Set
Disk Write Cache Mode
Capacity Truncation
Background Task Priority
Raid Rebuild Priority
UltraLow(5%)
Medium(50%)
High(80%)
Low(20%)
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Conguration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Raid System Function
Raid System Function
Mute The Alert Beeper
Alert Beeper Setting
Change Password
JBOD/RAID Function
Background Task Priority
Maximum SATA Mode
HDD Read Ahead Cache
Volume Data Read Ahead
Empty HDD slot LED
HDD SMART Status Polling
Controller Fan Detection
LED Polarity Setting
Auto Activate Raid Set
Disk Write Cache Mode
Capacity Truncation
Maximum SATA Mode
Maximum SATA Mode
SATA150
SATA150+NCQ
SATA300
SATA300+NCQ
SATA150+NCQ