User manual

BIOS CONFIGURATION
77
3.7.5.1 Mute The Alert Beeper
The “Mute The Alert Beeper” function item is used to control the
SATA RAID controller beeper. Select Yes option and press the
Enter key in the dialog box to turn the beeper off temporarily.
The beeper will still activate on the next event.
3.7.5.2 Alert Beeper Setting
The “Alert Beeper Setting” item is used to “Disabled or “Enable”
the SATA RAID controller alarm tone generator. Select “Disabled”
and press the Enter key in the dialog box to turn the beeper off.
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Conguration
View System Events
Clear Event Buffer
Hardware Monitor
System Information
Raid System Function
Raid System Function
Alert Beeper Setting
Change Password
JBOD/RAID Function
Background Task Priority
Maximum SATA Mode
HDD Read Ahead Cache
Volume Data Read Ahead
Empty HDD slot LED
HDD SMART Status Polling
Controller Fan Detection
LED Polarity Setting
Auto Activate Raid Set
Disk Write Cache Mode
Capacity Truncation
Mute The Alert Beeper
Mute Alert Beeper
No
Yes
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Conguration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Raid System Function
Raid System Function
Mute The Alert Beeper
Alert Beeper Setting
Change Password
JBOD/RAID Function
Background Task Priority
Maximum SATA Mode
HDD Read Ahead Cache
Volume Data Read Ahead
Empty HDD slot LED
HDD SMART Status Polling
Controller Fan Detection
LED Polaruty Setting
Auto Activate Raid Set
Disk Write Cache Mode
Capacity Truncation
Alert Beeper Setting
Alert Beeper Setting
Enabled
Disabled