User manual
BIOS CONFIGURATION
75
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Conguration
View System Events
Clear Event Buffer
Hardware Monitor
System Information
Physical Drive Information
Physical Drive Information
View Drive Information
Create Pass-Through Disk
Modify Pass-Through Disk
Identify Selected Drive
Delete Pass-Through
Select The Drive
Ch01| 80.0GB| Pass Through |ST380013AS
Delete Pass-Through
No
Yes
3.7.4.3 Modify a Pass-Through Disk
Use this option to modify pass-through disk attributes. To select
and modify a pass-through disk from the pool of pass-through
disks, move the cursor bar to the “Modify Pass-Through Drive”
option and then press the Enter key. The “Physical Drive Func-
tion” menu will show all pass-through drive number options.
Move the cursor bar to the desired item and then press the
Enter key to show all pass-through disk attributes. Select the
parameter from the list to be changed and them press the En-
ter key to modify it.
3.7.4.4 Delete Pass-Through Disk
To delete a pass-through drive from the pass-through drive
pool, move the cursor bar to the “Delete Pass-Through Drive”
item, then press the Enter key. The “Delete Pass-Through con-
rmation” screen will appear; select Yes option to delete it.
3.7.4.5 Identify Selected Drive
You can used the "Identify Selected Drive" feature to prevent
removing the wrong drive, the selected drive fault LED will blink
when the "Identify Selected Drive" is selected.