User manual

BIOS CONFIGURATION
74
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Conguration
View System Events
Clear Event Buffer
Hardware Monitor
System Information
Physical Drive Information
Physical Drive Information
Create Pass-Through Disk
Modify Pass-Through Disk
Delete Pass-Through Disk
Identify Selected Drive
View Drive Information
Select IDE Drives For Raid Set
Ch04| 80.0GB|RaidSet Member|ST380013AS
Ch05| 80.0GB|RaidSet Member|ST380013AS
Ch08| 80.0GB|RaidSet Member|ST380013AS
Ch01| 80.0GB|RaidSet Member|ST380013AS
Ch01
Model Name : ST380013AS
Serial Number : 5JV944ZF
Firmware Rev. : 3.18
Disk Capacity : 80.0 GB
PIO Mode : Mode 4
Current UDMA : SATA150(6)
Supported UDMA : SATA150(6)
Device State : RaidSet Member
Timeout Count : 0
Media Errors : 0
SMART Read Error Rate : 200 (51)
SMART Spinup Time : 173 (21)
SMART Reallocation Count : 200 (140)
SMART Seek Error Rate : 200 (51)
SMART Spinup Retries : 100 (51)
SMART Calibration Retries : 100 (51)
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Conguration
View System Events
Clear Event Buffer
Hardware Monitor
System Information
Physical Drive Information
Physical Drive Information
View Drive Information
Modify Pass-Through Disk
Delete Pass-Through Disk
Identify Selected Drive
Create Pass-Throught
Select The Drive
Ch04| 80.0GB| Free |ST380013AS
Ch01| 80.0GB| Free |ST380013AS
Pass-Through Disk Attribute
SCSI ID : 0
SCSI LUN : 0
Cache Mode : Write Back
Tag Queuing : Enabled
SCSI Channel : 0
Create Pass-Through
No
Yes
3.7.4.2 Create Pass-Through Disk
A pass-through disk is not controlled by the SATA RAID control-
ler rmware and thus can not be a part of a volume set. The
disk is available directly to the operating system as an individual
disk. It is typically used on a system where the operating system
is on a disk not controlled by the SATA RAID controller rmware.
The SCSI Channel, SCSI ID, SCSI LUN, Cache Mode, and Tag
Queuing must be specied to create a pass-through disk.