User manual

BIOS CONFIGURATION
65
• Capacity
The maximum available volume size is the default value for the
rst setting. Enter the appropriate volume size to t your ap-
plication. The capacity value can be increased or decreased by
the UP and DOWN arrow keys. The capacity of each volume
set must be less than or equal to the total capacity of the RAID
set on which it resides.
If volume capacity will exceed 2TB, controller will show the
"Greater Two TB Volume Support" sub-menu.
• No
It keeps the volume size with max. 2TB limitation.
• LBA 64
This option uses 16 bytes CDB instead of 10 bytes. The maximum
volume capacity supports up to 512TB.
This option works on different OS which supports 16 bytes CDB.
Such as:
Windows 2003 with SP1
Linux kernel 2.6.x or latter
• Use 4K Block
It change the sector size from default 512 Bytes to 4k Byetes. the
maximum volume capacity up to 16TB.
This option works under Windows platform only. And it can not
be converted to Dynamic Disk, because 4k sector size is not a
standard format.
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Conguration
View System Events
Clear Event Buffer
Hardware Monitor
System Information
Volume Set Function
Volume Set Function
Delete Volume Set
Modify Volume Set
Check Volume Set
Stop Volume Check
Display Volume Info.
Create Volume Set
Create Volume From Raid Set
Raid Set # 01
Raid Set # 00
Volume Creation
Volume Name : Volume Set # 00
Raid Level : 5
Capacity : 160.1GB
Stripe Size : 64K
SCSI Channel : 0
SCSI ID : 0
SCSI LUN : 0
Cache Mode : Write Back
Tag Queuing : Enabled
Capacity : 160.1GB
Available Capacity : 160.1GB
Selected Capacity : 160.1GB