User manual
BIOS CONFIGURATION
51
This password option allows user to set or clear the RAID control-
ler’s password protection feature. Once the password has been
set, the user can only monitor and congure the raid controller by
providing the correct password. The password is used to protect
the internal RAID controller from unauthorized entry. The control-
ler will only prompt for the password when entering the main menu
from the initial screen. The SATA RAID controller will automatically
return to the initial screen when it does not receive any command
in twenty seconds.
3.7.1 Quick Volume/RAID Setup
“Quick Volume/RAID Setup” is the fastest way to prepare a RAID
set and volume set. It requires only a few keystrokes to com-
plete. Although disk drives of different capacity may be used in
the RAID set, it will use the capacity of the smallest disk drive as
the capacity of all disk drives in the RAID set. The “Quick Vol-
ume/RAID Setup” option creates a RAID set with the following
properties:
1. All of the physical drives are contained in one RAID set.
2. The RAID level, hot spare, capacity, and stripe size options
are selected during the conguration process.
3. When a single volume set is created, it can consume all or a
portion of the available disk capacity in this RAID set.
4. If you need to add an additional volume set, use the main
menu “Create Volume Set” function.
The total number of physical drives in a specic RAID set deter-
mine the RAID levels that can be implemented within the RAID
Set. Select “Quick Volume/RAID Setup” from the main menu; all
possible RAID level will be displayed on the screen.
Clear Event Buffer Clear all information in the event buffer
Hardware Monitor Show the hardware system environment status
System Information View the controller system information