User manual
BIOS CONFIGURATION
50
3.7 Main Menu
The main menu shows all functions that are available for executing
actions, which is accomplished by clicking on the appropriate link.
Note:
The “Modify Volume Set” method provides the same func-
tions as the “Create Volume Set” conguration method. In the
“Volume Set function”, you can use “Modify Volume Set” to
change all volume set parameters except for capacity (size).
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Conguration
View System Events
Clear Event Buffer
Hardware Monitor
System Information
Quick Volume/Raid Setup
Verify Password
Note:
The manufacture
default password is
set to 0000; this
password can be
modied by selecting
Change Password
in the Raid System
Function section.
Option Description
Quick Volume/Raid Setup Create a default conguration based on the number of
physical disk installed
Raid Set Function Create a customized RAID set
Volume Set Function Create a customized volume set
Physical Drives View individual disk information
Raid System Function Setup the RAID system conguration
Hdd Power Management Manage HDD power based on usage patterns
Ethernet Conguration Ethernet LAN setting (12/16/24 ports only)
View System Events Record all system events in the buffer
11 If space remains in the raid set, the next volume set can be congured.
Repeat steps 8 to 10 to congure another volume set.