User manual
HARDWARE INSTALLATION
43
SNMP Manager Console Integration
• Out of Band-Using Ethernet Port (12/16/24-port Control-
ler)
Before launching the rmware-embedded SNMP agent in the
sever, you need rst to enable the reware-embedded SNMP
agent function on your SATA RAID controller. If you need
additional information about installation and start-up this
function, see the section 6.8.4 SNMP Conguration (12/16/24-
port)
• In-Band-Using PCI-X/PCIe Bus (4/8/12/16/24-port
Controller)
Before launching the SNMP agent in the sever, you need to en-
able the reware-embedded SNMP community conguration rst
and install Areca SNMP extension agent in your server system.
If you need additional information about installation and start-up
the function, see the SNMP Operation & Installation section in the
Appendix C.
Single Admin Portal (SAP) Monitor
This utility can scan for multiple RAID units on the network and
monitor the controller set status. It also includes a disk stress test
utility to identify marginal spec disks before putting the RAID unit
into a production environment.
For additional information, see the utility manual in the packaged
software CD or download it from the web site http://www.areca.
com.tw