User manual

HARDWARE INSTALLATION

Table-1 Min SAS 4i cable(SFF8087) pin assignment

Figure 2-19, Min SAS 4x to Min SAS 4x Cable

HDD R3+ A16 HDD T3+ B16

HDD R3- A17 HDD T3- B17

GND A1, A4, A7, A12, A15, A18 GND B1, B4, B7, B12, B15,

B18

Step 5-6. Connect the Min SAS 4x to Min SAS 4x Cable

Model ARC-12X0ML/12X1ML have external Min SAS 4x (SFF-8088)

connectors, each of them can support up to four SATA drives. These

adapters can be installed in a server which works with external

RAID enclosure with a Min SAS 4x connector. External Min SAS 4x

cables are not included in the ARC-12X0ML/12X1ML package.

If you have not connected your Min SAS 4x cables yet, use the

cables included with your enclosure to connect your controller to

the Min SAS 4x connector. This type of cable will depend on what

enclosure you have. The above diagram shows one example picture

of Min SAS 4x cable.

Step 6. Install the LED Cable (optional)

ARC-1XXX Series Fault/Activity Header Intelligent Electronics

Schematic.