User manual

HARDWARE INSTALLATION
26
Step 5-3. Connect the Min SAS 4i to 4*SATA Cable
Model ARC-1231ML/1261ML/1280ML have Min SAS 4i (SFF-8087)
internal connectors, each of them can support up to four SATA
drives. These adapters can be installed in a server RAID enclosure
with a standard SATA connector backplane. Min SAS 4i to SATA
cables are included in the ARC-1231ML/1261ML/1280ML package.
The following diagram shows the picture of MinSAS 4i to 4*SATA
cables.
Unpack and remove the PCI RAID cards. Inspect it carefully. If
anything is missing or damaged, contact your local dealer.
For sideband cable signal Please refer to page 37 for SGPIO bus.
Figure 2-15, Min SAS 4i to 4*SATA Cable
Figure 2-14, Multi-Lance Cable