User manual
131
WEB BROWSER-BASED CONFIGURATION
When the “Enter Pass Through Disk Attribute” screen appears,
modify the drive attribute values, as you want. After you com-
plete the selection, mark the check box for “Conrm The Opera-
tion” and click on the “Submit” button to complete the selection
action.
6.7.3 Delete Pass Through Disk
To delete a pass through drive from the pass through drive pool,
move the mouse cursor bar to the main menus and click the “De-
lete Pass Through” link.
After you complete the selection, mark the check box for “Con-
rm The Operation” and click the “Submit” button to complete the
delete action.
6.7.4 Identify Selected Drive
To prevent removal of the wrong drive, the selected fault LED will
blink so as to physically locate the intended disk when “Identify
Selected Drive” is selected.
To identify the selected drive from the drives pool, click “Identify
Selected Drive”. The “Select The IDE Device For Identication”