User manual

123
WEB BROWSER-BASED CONFIGURATION
6.5.6 Delete Hot Spare
Select the target Hot Spare disk to be deleted by clicking on the
appropriate check box.
Click the “Conrm The Operation” check box and click the “Sub-
mit button on the screen to delete the hot spares.
6.5.7 Rescue Raid Set
When the system is powered off in the RAID set update/creation
period, it possibly could disappear due to this abnormal condition.
The “RESCUE” function can recover the missing RAID set informa-
tion. The RAID controller uses the time as the RAID set signature.
The RAID set may have different time after the RAID set is recov-
ered. The “SIGANT” function can regenerate the signature for the
RAID set.
6.5.8 Ofine Raid Set
This function is for customer being able to unmount and remount
a multi-disk volume. All Hdds of the selected RAID set will be put
into ofine state, spun down and fault LED in fast blinking mode.
User can remove those Hdds and insert new Hdds on those empty
slots without needing power down the controller.
Note:
Please contact us to make sure if you need to use rescue
function. Improperly usage may cause conguration
corruption.