User manual
ARCHTTP PROXY SERVER INSTALLATION
110
Controller [1] Http: New Recv 243 bytes
Controller [1] Http: Send [174] bytes back to the client
(3). If you need the “Cfg Assistant”, please refer to section 5.6
ArcHttp Conguration.
(4). See the next chapter detailing the McRAID storage manager
to customize your RAID volume set.
5.3 For FreeBSD
You should have administrative level permissions to install SATA
RAID software. This procedure assumes that the SATA RAID hard-
ware and FreeBSD are installed and operational in your system.
The following details FreeBSD installation procedure of the SATA
RAID controller software.
1. Insert the RAID controller CD in the CD-ROM drive.
2. Copy <CD-ROM>\PACKAGES\FreeBSD\http directory to local
The next following step is the same with Linux. Please see section
5.2 For Linux.
5.4 For Solaris 10 x86
You must have administrative level permissions to install SATA
RAID software. This procedure assumes that the SATA RAID hard-
ware and FreeBSD are installed and operational in your system.
The following details Solaris installation procedure of the SATA
RAID controller software.
1. Insert the RAID subsystem CD in the CD-ROM drive.
2. Copy <CD-ROM>\PACKAGES\Solaris\http directory to local The
next following step is the same with Linux. Please see section 5.2
For Linux.
5.5 For Mac OS 10.x
The ArcHttp proxy server is provided on the software CD delivered
with SATA card or download from the www.areca.com.tw. The rm-
ware embedded McRAID storage manager can congure and moni-