User manual

DRIVER INSTALLATION

2. Start the system and then press Tab+F6 to enter the McBI-

OS RAID manager utility. Use the conguration utility to create

the raid set and volume set. For details, see Chapter 3, McBIOS

RAID Manager. Once a volume set is created and congured,

continue with installation of the driver.

3. Re-Boot Windows and the OS will recognize the SATA RAID

Controller and launch the “Found New Hardware Wizard”, which

guides you in installing the SATA RAID driver.

4. The “Upgrade Device Driver Wizard” will pop-up and provide a

choice of how to proceed. Choose “Display a list of known driv-

ers for this device, so that you can choose a specic driver.” and

click on “Next”.

5. When the next screen queries the user about utilizing the cur-

rently installed driver, click on the “Have Disk” button.

6. When the “Install From Disk” dialog appears, insert the SATA

RAID controller driver diskette or the shipping CD-ROM and

type-in or browse to the correct path for the “Copy manufactur-

er’s les from:” dialog box.

7. After specifying the driver location, the previous dialog box

will appear showing the selected driver to be installed. Click the

“Next” button.

8. The “Digital Signature Not Found” screen will appear. Click on

“Yes” to continue the installation.

9. Windows automatically copies the appropriate driver les and

rebuilds its driver database.

10. The “Found New Hardware Wizard” summary screen ap-

pears; click the “Finish”button.

11. The “System Settings Change” dialog box appears. Remove

the diskette from the drive and click Yes option to restart the

computer to load the new drivers.

12. See Chapter 5 in this manual for information on customizing

your RAID volumes using McRAID storage manager.