User manual

BIOS CONFIGURATION
76
screen. The system will automatically go back to the initial
screen if it does not receive any command in 20 seconds.
To set or change the password, move the cursor to “Raid System
Function” screen, press the “Change Password” item. The “Enter
New Password” screen will appear.
To disable the password, only press Enter key in both the “Enter
New Password” and “Re-Enter New Password” column. The ex-
isting password will be cleared. No password checking will occur
when entering the main menu.
3.7.5.4 JBOD/RAID Function
JBOD is an acronym for “Just a Bunch Of Disk”. A group of hard
disks in a RAID controllers are not set up as any type of RAID
conguration. All drives are available to the operating system as
an individual disk. JBOD does not provide data redundancy. User
needs to delete the RAID set, when you want to change the
option from the RAID to the JBOD function.
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Conguration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Raid System Function
Raid System Function
Mute The Alert Beeper
Alert Beeper Setting
Change Password
JBOD/RAID Function
Background Task Priority
Maximum SATA Mode
HDD Read Ahead Cache
STagger Power on
Empty HDD slot LED
HDD SMART Status Polling
Controller Fan Detection
Disk Write Cache Mode
Capacity Truncation
JBOD/RAID Function
JBOD/RAID Function
JBOD
RAID