User manual

BIOS CONFIGURATION
72
When you choose this option, the physical disks connected to
the SATA RAID controller are listed. Move the cursor to the de-
sired drive and press Enter to view drive information.
3.7.4.2 Create Pass-Through Disk
A pass-through disk is not controlled by the SATA RAID control-
ler rmware and thus can not be a part of a volume set. The
disk is available directly to the operating system as an individual
disk. It is typically used on a system where the operating sys-
tem is on a disk not controlled by the SATA RAID controller rm-
ware. The SCSI Channel, SCSI ID, SCSI LUN, Cache Mode, and
Tag Queuing must be specied to create a pass-through disk.
3.7.4.3 Modify a Pass-Through Disk
Use this option to modify pass-through disk attributes. To select
and modify a pass-through disk from the pool of pass-through
disks, move the cursor bar to the “Modify Pass-Through Drive”
option and then press the Enter key. The “Physical Drive Func-
tion” menu will show all pass-through drive number options.
Move the cursor bar to the desired item and then press the
Enter key to show all pass-through disk attributes. Select the
parameter from the list to be changed and them press the Enter
key to modify it.
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Conguration
View System Events
Clear Event Buffer
Hardware Monitor
System Information
Physical Drive Information
Physical Drive Information
View Drive Information
Modify Pass-Through Disk
Delete Pass-Through Disk
Identify Selected Drive
Create Pass-Throught
Select The Drive
Ch04| 80.0GB| Free |ST380013AS
Ch01| 80.0GB| Free |ST380013AS
Pass-Through Disk Attribute
SCSI ID : 0
SCSI LUN : 0
Cache Mode : Write Back
Tag Queuing : Enabled
SCSI Channel : 0
Create Pass-Through
No
Yes