User manual

BIOS CONFIGURATION
68
As shown, volume information can be modied at this screen.
Choose this option to display the properties of the selected vol-
ume set; all values can be modied except only the last volume
set capacity of the expand RAID set.
3.7.3.3.1 Volume Growth
Use “Expand RAID Set” function to add disk to a RAID set. The
additional capacity can be used to enlarge the last volume set
size or to create another volume set. The “Modify Volume Set”
function can support the “Volume Modication” function. To
expand the last volume set capacity , move the cursor bar to
the “ Capacity” item and entry the capacity size. When nished
the above action, press the ESC key and select the Yes option
to complete the action. The last volume set starts to expand its
capacity.
To expand an existing volume noticed:
• Only the last volume can expand capacity.
• When expand volume capacity, you can’t modify stripe size or
modify RAID revel simultaneously.
• You can expand volume capacity, but can’t reduce volume
capacity size.
• After volume expansion, the volume capacity can't be
decreased.
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Conguration
View System Events
Clear Event Buffer
Hardware Monitor
System Information
Volume Set Function
Volume Set Function
Create Volume Set
Delete Volume Set
t
Check Volume Set
StopVolume Check
Display Volume Info.
Modify Volume Set
Modify Volume From Raid Set
Raid Set # 01
Raid Set # 00
Select Volume To Modify
Volume Set # 00
Volume Modication
Raid Level : 6
Capacity : 160.1GB
Stripe Size : 64K
SCSI Channel : 0
SCSI ID : 0
SCSI LUN : 0
Cache Mode : Write Back
Tag Queuing : Enabled
Volume Name : Volume Set # 00