User manual

BIOS CONFIGURATION
65
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Conguration
View System Events
Clear Event Buffer
Hardware Monitor
System Information
Volume Set Function
Volume Set Function
Delete Volume Set
Modify Volume Set
Check Volume Set
StopVolume Check
Display Volume Info.
Create Volume Set
Create Volume From Raid Set
Raid Set # 01
Raid Set # 00
Volume Creation
Volume Name : Volume Set # 00
Raid Level : 5
Capacity : 160.1GB
Stripe Size : 64K
SCSI Channel : 0
SCSI ID : 0
SCSI LUN : 0
Cache Mode : Write Back
Tag Queuing : Enabled
SCSI ID : 0
• SCSI ID
Each device attached to the SATA card, as well as the card it-
self, must be assigned a unique SCSI ID number. A SCSI chan-
nel can connect up to 15 devices. It is necessary to assign a
SCSI ID to each device from a list of available SCSI IDs.
• SCSI LUN
Each SCSI ID can support up to 8 LUNs. Most SATA controllers
treat each LUN as if it were a SATA disk.
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Conguration
View System Events
Clear Event Buffer
Hardware Monitor
System Information
Volume Set Function
Volume Set Function
Delete Volume Set
Modify Volume Set
Check Volume Set
StopVolume Check
Display Volume Info.
Create Volume Set
Create Volume From Raid Set
Raid Set # 01
Raid Set # 00
Volume Creation
Volume Name : Volume Set # 00
Raid Level : 5
Capacity : 160.1GB
Stripe Size : 64K
SCSI Channel : 0
SCSI ID : 0
SCSI LUN : 0
Cache Mode : Write Back
Tag Queuing : Enabled
SCSI LUN : 0