User manual
HARDWARE INSTALLATION
39
Note:
Look for latest release versions of drivers, please download
from http://www.areca.com.tw
Step 11. Install ArcHttp Proxy Server
The SATA RAID controller rmware has embedded the web-browser
McRAID storage manager. ArcHttp proxy server will enable it. The
browser-based McRAID storage manager provides all of the cre-
ation, management, and monitor SATA RAID controller status.
Please refer to the Chapter 5 for the detail ArcHttp Proxy Server
Installation. For SNMP agent function, please refer to Appendix C.
Step 12. Determining the Boot Sequences
The SATA RAID controller is a bootable controller. If your system
already contains a bootable device with an installed operating sys-
tem, you can set up your system to boot a second operating sys-
tem from the new controller. To add a second bootable controller,
you may need to enter setup of M/B BIOS and change the device
boot sequence so that the SATA RAID controller heads the list. If
the system BIOS setup does not allow this change, your system
may not be congurable to allow the SATA RAID controller to act as
a second boot device.
Summary of the Installation
The ow chart below describes the installation procedures for SATA
RAID controller. These procedures include hardware installation,
the creation and conguration of a RAID volume through the Mc-
BIOS/McRAID, OS installation and installation of SATA RAID con-
troller software.
The software components congure and monitor the SATA RAID
controller via ArcHttp proxy server.