User manual

WEB BROWSER-BASED CONFIGURATION
126
SATA RAID controller has included the option for customer
to select the disk drives sequentially stagger power up value.
The values can be selected from 0.4s to 6s per step which
powers up one drive.
•
Empty HDD Slot LED
The rmware has added the "Empty HDD Slot LED" option to
setup the fault LED light "ON "or "OFF" when there is no HDD
installed. When each slot has a power LED for the HDD installed
identify, user can set this option to "OFF". Choose option "ON",
the SATA RAID controller will light the fault LED; if no HDD
installed.