User manual

WEB BROWSER-BASED CONFIGURATION
124
6.7.4 Identify Selected Drive
To prevent removal of the wrong drive, the selected fault LED will
blink so as to physically locate the intended disk when “Identify
Selected Drive” is selected.
To identify the selected drive from the drives pool, click “Identify
Selected Drive”. The “Select The IDE Device For Identication”
screen appears mark the check box for the SATA device from the
drive pool. After completing the selection, click on the “Submit”
button to identify selected drive.
6.8 System Controls
6.8.1 System Cong
To set the RAID system conguration, move the cursor to the
main menu and click the “System Controls” link. The “System
Controls” will show all items, then select the desired function.
• System Beeper Setting
The “System Beeper Setting” function item is used to “Disable”
or “Enable” the SATA RAID controller alarm tone generator.
• Background Task Priority
The ‘Background Task Priority” is a relative indication of how
much time the controller devotes to a rebuild operation. The
SATA RAID controller allows the user to choose the rebuild prior-
ity (UltraLow, Low, Normal, High) to balance volume set access
and rebuild tasks appropriately. For high array performance,
specify a “Low” value.