User manual
WEB BROWSER-BASED CONFIGURATION
120
modify. Click the “Submit” button. The following screen appears.
Use this option to modify the volume set conguration. To modify
volume set attributes, move the cursor bar to the volume set at-
tribute menu and click it. The “Enter The Volume Attribute” screen
appears. Move the cursor to an attribute item and then click the
attribute to modify the value. After you complete the modica-
tion, click the “Conrm The Operation” check box and click the
“Submit” button to complete the action. The user can modify all
values except capacity.
6.6.3.1 Volume Growth
Use “Expand RAID Set’ function to add disk to a RAID set. The
additional capacity can be used to enlarge the last volume set
size or to create another volume set. The “Modify Volume Set”
function can support the “Volume Modication” function. To
expand the last volume set capacity , move the cursor bar to
the “ Capacity” item and entry the capacity size. When nished
the above action, press the ESC key and select the Yes option
to complete the action. The last volume set starts to expand its
capacity.
To expand an existing volume noticed:
• Only the last volume can expand capacity.
• When expand volume capacity, you can’t modify stripe size or
modify RAID revel simultaneously.
• You can expand volume capacity, but can’t reduce volume
capacity size.
• After volume expansion, the volume capacity can't be
decreased.
For greater 2TB expansion:
• If your system installed in the volume, don't expand the
volume capacity greater 2TB, currently OS can’t support boot
up from a greater 2TB capacity device.
• Expand over 2TB used LBA64 mode. Please make sure your
OS supports LBA64 before expand it.